Experiencing a major technological disaster is a rite of passage among presenters. At SQL Saturday in Madison, I had my first presentation laptop failure. Surprisingly, it happened with my MacBook Air. (I’ve had two MacBooks with zero problems, versus three HPs with a combined twelve hardware failures.)
The projector will usually post a message on screen when the lamp is nearing the end of its life expectancy. Contact your technology coordinator for a lamp replacement. Be sure to provide the tech coordinator with the make and model number of your project. My Laptop shows full desktop but Projector is only showing Wallpaper without Icons. Free geisha slots. If you're trying to connect a 4K display or Ultra HD TV with your Mac, make sure your computer meets the requirements for using these external displays. If your software and firmware are up to date, or if you can't see the image on your screen, try the steps below for your specific issue. Vice city stories ios. Photoshop freeware mac.
With ten minutes to go before my presentation, I could not get the laptop to recognize the projector. I checked and re-checked the cable, the DisplayPort<->VGA adapter, restarted both projector and laptop. A few other speakers tried to help, as did the room monitor. Five minutes into my session time, I plugged in a copy I had on a USB drive to the room’s PC and began my presentation. Not long after, the IT person in charge that day took my laptop to another room to see if he could get signal there. He couldn’t. I continued on, blowing past the three VM-based demos I had lined up. Fortunately, the presentation went well enough without the demos.
Last week, I finally took the laptop down to the Apple Store and got some answers. What happened? In short, the chunk of memory that stores information about display connections became corrupt. With about sixty seconds of work, the guy at the Genius Bar got it to recognize both Apple and generic VGA monitors. Here’s what he did to clear the memory.
First, he reset what he called the Power Management Unit (PMU) using these steps:
Shut down the computer.
Connect it to AC power.
Press the left shift + command + option + power button.
Second, he reset the Parameter RAM (PRAM) on the computer using these steps:
Projector Not Projecting Computer Screen
Shut down the computer.
Press the power button to turn on the computer.
Immediately, before the gray screen appears, press and hold command + option + P + R. Hold the keys down until the machine restarts and you hear the second startup sound.
Display Computer Screen On Projector
If your MacBook ever refuses to recognize a projector or VGA connection and you’ve tried everything you can think of, try resetting the PRAM. It may save you from having to dismember your presentation at the last minute.
0 
Star